Category Archives: crushing equipment

VSI6X Vertical Shaft Impact Crusher

Published by:

VSI6X series of Vertical Shaft Impact Crusher is widely used in various metallic and nonmetallic ores, cement, corhart, abrasive material, glass, construction material, machine-made sand, metallurgy, etc. It is also applicable to crush various stones with different hardness in medium and fine crushing area, such as iron ore, non ferrous metal, emery, bauxite, quartz sand, basalt, etc.

Features:
VSI6X series of Vertical shaft Impact Crusher introduces German technology. VSI6X is the key equipment in sand making area with many patents. VSI6X is a kind of totally new high efficient crusher. It has the following features:
1. Rotor with deep chamber increases 30% capacity after perfect design.
2. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%.
3. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate.
4. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area.
5. Rhombus shape impact plate is used to prevent side plate from being damaged.
6. Bearing is famous international brand imported from Japan, Sweden, America, etc.
7. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly.
8. Spread dish with double purposes can make two feeding ways change easily.
9. Special seal structure under main shaft guarantee no oil leak without seal.
10. Japanese hydraulic opening cover device is originally imported. The cover is moved easily and inspection of inner part is easy.
11. Motor with high grade of protection is selected. The motor has features of high efficiency, low noise, etc. The motor complies with IEC, insulation grade F, protection grade IP54/55.

Working principle:
When entering into impeller, the raw material can be crushed directly by hitting impact plate after it is accelerated and threw out. The raw material can also be divided into two parts by material-dividing plate. One falls down from all around. The other enters into impeller and is accelerated, threw out and collides with the falling material and hit, rebound with impact plate. The circulation hits repeats. As the crushing is moving forward, small particle materials will gradually form a material bed around the impact plate which can improve the crushing effect and protect the machine. The desired artificial sand comes downwards though outlet finally.

Technical data:

Model VSI6X1263 VSI6X1150
all central feed(t/h) Sand making 454-486 344-368
reshaping 545-583 413-442
Max feeding size(mm) Sand making ≤50 ≤45
reshaping ≤60 ≤55
Rotation speed(r/min) 900-1200 1000-1300
Double motor(kW) 630 500
Dimension(L*W*H) (mm) 5700X2980X4190 5500X2750X3950
Weight(t) rock on rock 20 17.6
rock on steel 23 20
power Voltage(V):AC380、480、440、415、400
Frequency(Hz):0、60
thin oil lubrication station Flow capacity(L/min) 4-16
Motor power(kW) 0.75
Heater power(kW) 4
Safety protection Stop automatically without oil flow; wind cooling system; Heater system in winter

Note: Any change of VSI6S vertical shaft impact crusher technical data shall not be advised additionally.

CS Series Cone Crusher

Published by:

CS Series Cone Crusher is a kind of high efficiency spring cone crusher, which integrate optimization of cavity-type and reasonable stoke and advanced technology, and follows the conception of laminated crushing principle of more crushing and less grinding. CS Series Cone Crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product.

Features:
1. Higher capacity and less wear costs.
2. Wide range of application suitability.
3. Easy to maintain, reduce the downtime and maintenance costs.
4. Stable running performance and easy operation.
5. Stable bevel wheel transmission device
6. Balanced runout rotation ensures best capacity.
7. Proper operation, continuously load until the machine shut down scheduled.

Working principle:
Motor drives eccentric bushing to rotate via V-belts, pulley, shaft, pionion, gear. Mantle rotates with eccentric bushing, so mantle goes near and far from the concave, and crush stone into smaller size.

Technical data:

Model Dia. mm (inch) Cavity Feed Opening Outlet Setting (mm) Shaft Speed (r/min) Power (kw) Capacity (t/h) Weight (t) Dimension (mm)
Closing Side (mm) Open Side (mm)
CSB75 900 (3′) Fine 83 102 9-22 580 75 45-91 15 2821×1880×2164
Coarse 159 175 13-38 59-163
CSB160 1295 (4 1/4′) Fine 109 137 13-31 485 185 109-181 27 2800×2342×2668
Medium 188 210 16-38 132-253
Coarse 216 241 19-51 172-349
CSB240 1650 (5 1/2′) Fine 188 209 16-38 485 220 181-327 55 3911×2870×3771
Medium 213 241 22-51 258-417
Coarse 241 268 25-64 299-635
CSB400 2134 (7′) Fine 253 278 19-38 435 315 381-726 110 4613×3251×4732
Medium 303 334 25-51 608-998
Coarse 334 369 31-64 789-1270

Short Head

Model Dia. mm (inch) Cavity Feed Opening Outlet Setting (mm) Shaft Speed (r/min) Power (kw) Capacity (t/hour) Weight (t) Dimension (mm)
Closing Side (mm) Open Side (mm)
CSD75 914 (3′) Fine 13 41 3-13 580 75 27-90 15 2821×1880×2410
Coarse 33 60 3-16 27-100
CSD160 1295 (4 1/4′) Fine 29 64 3-16 485 160 36-163 27 2800×2342×2668
Medium 54 89 6-16 82-163
Coarse 70 105 10-25 109-227
CSD240 1676 (5 1/2′) Fine 35 70 5-13 485 220 90-209 55 3917×2870×3771
Medium 54 89 6-19 136-281
Coarse 98 133 10-25 190-336
CSD400 2134 (7′) Fine 51 105 5-16 435 315 190-408 110 4130×3251×4454
Medium 95 133 10-19 354-508
Coarse 127 178 13-25 454-599

Note: Any change of CS Cone Crusher technical data shall not be advised additionally.

HPT Series Cone Crusher (Hydraulic)

Published by:

HPT Series Cone Crusher (Hydraulic) is designed to meet clients’ request of the high outputs, excellent product fineness and economical running costs. HPT Series Cone Crusher (Hydraulic) introduced the Germany technology, not only improves the production capacity and crushing efficiency, but also widens applying area, hardness range of materials from limestone to basalt. HPT Series Cone Crusher (Hydraulic) is an ideal crusher for large stone crushing factory and mining industry.

Features:
HPT Series Hydraulic Cone Crusher has a better performance compared with spring cone crusher and ordinary Hydraulic Cone Crusher:
1. High crushing ratio and production efficiency;
2. Less spare part consumption and low operation cost;
3. Between-layer pressuring crushing and better finished product shape;
4. Hydraulic protection and hydraulic cavity clearing, high automatization and less stopping production and repairing time;
5. Thin oil lubrication makes the life time increased;
6. Various crushing cavity;
7. Easy maintenance and operation;
8. The crusher can provide customers larger capacity, better product shape, and easy operation.

Working principle:
Under the leading role of eccentric sleeve, the movable cone of the HPT Series high-efficiency hydraulic cone crusher does rotary and pendulum movement which drives the broken walls squeeze and twist the raw material between the rolling ace tabular wall and it. According to laminated theory, the raw material is crushed and polished following their own texture by the force from different directions. Stable aggregate are produced finally. The eligible raw material falls down from the gap of the broken wall. The others will be kept crushing until it reaches the desired size.

Technical data:

Type Cavity (coarse/fine) Min. discharge size (mm) Open Side Setting(mm) Capacity (t/h) Power (kW)
HPT-200 C 13 150 120-240 160
F 6 76 55-180
HPT-300 C 20 240 190-380 250
M 16 190 175-320
F 13 145 110-260
EF 10 120 100-240
HPT-400 C 13 290 190-610 315
F 6 100 108-320
HPT-500 C 30 320 380-700 400
EF 13 150 200-430

Note: Any change of HP Cone Crusher technical data shall not be advised additionally.

CI5X Series Impact Crushers

Published by:

CI5X series impact crushers is a new generation of primary and secondary impact crusher and the best solution for the large capacity production line , which is designed to meet the customers requirements for high yields, cost-effective, saving energy. CI5X series impact crushers bases on absorbing the advantages of the last generation products and integrates the latest scientific research achievements,like high-precision heavy rotor, involute crushing cavity, multi-function hydraulic operating system, etc, Which improves the performance of the product and adequately protects the profits of the customers.

Features:
1.Finite element analysis technology is adopted to reduce the weight of the crusher substantially and make transportation and installation more convenient.
2.The design of high-precision heavy  type rotor improves the capacity and rotating speed of rotor remarkably.
3.Adopting the design of multi-function hydraulic system realize intelligent control for frame, impact rack, output size and maintenance. Besides, the operation is much easier and operating rate is improved.
4.Efficient involute-shaped crushing chamber makes the efficiency higher and final product size well-distributed.
5.According to various working conditions, the crusher adopts wearable hammer and impact plate which ensures the equipment is in the of the optimal operation.
The exact matching power for driving motors is adopted to reach the aim of cost optimized control.

Working principle:
The CI5X Series Impact Crushers crushes material by striking energy. When it works, the motor drives the rotor rate at a high speed, on which the blow bar is installed. As soon as the material get into the affecting area of the blow bar , they will be stroke by the blow bar and thrown to the impact devices around the rotor. The high speed forces the material to rebound from the impact liner to the area where the blow bar effects until they have been crushed to the required size. The clearance between the impact racks and the rotor can be adjusted to change the size and shape of the end products.

Technical data

Model Specifications (mm) Feed opening (mm) Max. feed size (mm) Capacity (t/h) Power (kW) Weight (t) Dimensions (mm)
CI5X1315 Φ1300×1500 1540×930 600 250-350 250 20 2880×2755×2560
CI5X1520 Φ1500×2000 2040×520 (2040×995) 350(700) 400-600 2×250 (2×200) 30 3390×3520×2790
CI5X1415 Φ1400×1500 1540×1320 900 350-550 250 24 2995×2790×3090
CI5X1620 Φ1600×2000 2040×1630 1100 500-900 2×200 42 3485×3605×3720
CI5X2023 Φ2000×2300 2400×1920 1300 1200-2000 2×500 76 4890×4380×4765

C6X Series Jaw Crusher

Published by:

SKD developed a new generation of energy-efficient jaw crusher – C6X series jaw crusher. This equipment adopts the most advanced crushing technology and manufacturing level so that it can efficiently crush the hard and strong abrasion materials.The C6X series jaw crusher has all international first-class level indexes (such as equipment structure, use functions, production efficiency, etc.), and becomes the most ideal coarse crushing equipment on the market currently at home and abroad.

Features & Advantages
1、The rack adopts design of separated side wall, front and rear wall, which greatly increase service life of the crusher.
2、Optimize the crushing cavity structure and movement locus of movable jaw, thus it would achieve higher crushing efficiency under the same energy consumption.
3、Double-wedges adjusting device makes the adjustment of discharge opening easier, more -efficient and safer.
4、It adopts elastic limit block and rubber shock-mitigating device to replace the rigid anchor connection, which improve the service life of the crusher.
5、Integrated motor seat design. Motor seat is fixed installed on the crusher, and it reduces the installation space and makes the power transmission more stable at the same time.

Working Principle
The C6Xseries Jaw Crusher is driven by electric motor. Electric motor drives the driving pulley  through SPC belt, and the pulley will drive eccentric shaft to bob the movable jaw. Materials would be crushed or split into pieces when movable jaw drives movable jaw plate to move to fixed jaw plate. When movable jaw drives movable jaw plate away from fixed jaw plate, the crushing cavity volume get larger, then materials that have been crushed in the crushing cavity would be discharged from the discharging opening. As the motor running continuously, the crusher crushes and discharges materials periodically, finally achieving the whole crushing process.

Technical data

Model C6X110 C6X125 C6X145 C6X160 C6X200
Feeding port length(mm) 1100 1250 1450 1600 2000
Feeding width(mm) 850 950 1100 1200 1500
Electric motor(Kw) 160 160 200 250 400
Rotating speed(rpm) 230 220 220 220 200
Product Size(mm) Tight edge discharge port(mm) t/h t/h t/h t/h t/h
0-105 70
0-120 80 160-240
0-135 90 180-260
0-150 100 200-280 240-340
0-185 125 250-360 280-410 320-470
0-225 150 300-430 340-480 370-550 420-610
0-260 175 340-490 370-550 430-630 470-700 620-890
0-300 200 380-550 420-620 480-710 530-790 690-1000
0-340 225 470-690 540-790 590-880 770-1100
0-375 250 520-760 600-870 650-970 850-1200
0-410 275 660-950 700-1060 930-1300
0-450 300 750-1100 1000-1500

Note: Kefid has the right of designing and modification, if any change, there’s no regular notification. Hope you could understand.